- Mix High Power WS Pre-spray Pre-spray at 30ml per litre.
- Apply a liberal amount of pre-spray to the carpet using overlapping passes.
- Allow Pre-spray to sit on carpet for 15 minutes. During this time the product will break down soils and deodorise the carpet.
- Brush Pre-spray into carpet using manual or mechanical methods.
- Rinse extract the chemical using WS Stain Repel rinse, This should be mixed at 30ml per 10 litres in your clean water tank.
- Make slow passes using your stair tool and for every wet pass make sure you follow up with at least 2 dry passes. Ensure these passes are all uniform and no zig zagging occurs as uneven pile / Sharks teeth can set permanently into wool carpets and be extremely difficult to remove.
- If any stains remain these can be spotted using a suitable Spot cleaning product. Please see spotting guide for help.
Menu
