Please note when dealing with Blood, Multiple applications may be required including use of a water claw. PPE should be worn and equipment disinfected. Biohazard training recommended.
- Spot heavy areas using High Power WS Pre-spray At 30ml per litre, Extract using High Power WS Neutraliser acidic rinse at 30ml per 10 litres in your machine.
- Mix High Power WS Pre-spray at 30ml per litre.
- Apply a heavy amount of pre-spray to the carpet using overlapping passes.
- Allow Pre-spray to sit on carpet for 15 minutes. During this time the product will break down soils and deodorise the carpet.
- Once dwell time is complete use mechanical scrubbing methods to thoroughly scrub the carpet.
- Rinse extract the chemical using WS High Power WS Neutraliser acidic rinse, This should be mixed at 30ml per 10 litres in your clean water tank.
- Make slow passes using your carpet cleaning wand and for every wet pass make sure you follow up with at least 2 dry passes. Ensure these passes are all uniform and no zig zagging occurs as uneven pile / Sharks teeth can set permanently into wool carpets and be extremely difficult to remove.
- If any stains remain these can be spotted using a suitable Spot cleaning product. Please see spotting guide for help.