Please note this is a salvage method as mineral solvents could cause delamination to synthetic carpets – or remove glued down tufts. This method can be used for make-up.
- Apply Solvent spotter – stain remover Via a spray trigger or white cotton terry towel and emulsify the stain.
- Stain will break down and transfer into the towel.
- Step 2 may need repeating until stain has been completely emulsified or transferred out.
- Rinse extract the chemical using High Performance rinse, This should be mixed at 30ml per 10 litres in your clean water tank.
- Make slow passes using your cleaning wand and for every wet pass make sure you follow up with at least 2 dry passes. On Polypropylene and Polyester carpets zig zagging and sharks teeth will not permanently disrupt the pile, however for a professional finish leave in a uniform condition.
- If the customer wants to make future occurrences easier to remove: Apply WS Advanced fabric stain protection at 1-1 for a long lasting dirt and hydrophobic barrier. This can be done wet or dry.