SYNTHETIC LOW MOISTURE SYNERGY FOR DESTROYED CARPETS GUIDE

For this method you will need a slow speed rotary floor cleaner or orbital and an agitation / zebra pad

1. Mix High Performance Pre-Spray Pre-spray at 30ml per litre.
   
2. Apply a liberal amount of pre-spray to the carpet using overlapping passes.
   
3. Allow Pre-spray to sit on carpet for 15 minutes. During this time the product will break down soils.
   
4. Spray your pad with High Power WS Neutraliser acidic rinse mixed at 30ml per litre or soak in a bucket mixture of the same chemical.
   
5. Make slow overlapping passes using your machine over the applied product. You can use your shower feed tank to apply more High Power WS Neutraliser acidic rinse and continuously clean without re-dipping your pad.
   
6. For extreme soiling cases –Follow up with a dry microfibre bonnet to dry off any excess dirt.
   
7. FOR CHEWING GUM – Apply High Power VLM Pre-spray as a spotter at 50/50 – 1 litre to 1 litre, and gently lift the gum from underneath. It will remove extremely easily without the need of harsh solvents.